Optical Smoke Detector, DIL style, 55000-665IMC Our DIL Switch Addressed (DSA) Context Plus optical detector has a molded self extinguishing white polycarbonate case designed to allow free entry of smoke while minimizing the effects of dust contamination. Stainless steel wiper contacts connect the detector to the terminals in the mounting base. Within the case is […]
READ MORE »
Standard Temperature Detector, DIL style, 55000-465IMC High Temperature Detector, DIL style, 55000-475IMC Our DIL Switch Addressed (DSA) Context Plus temperature detectors have a low air flow resistance case made of self-extinguishing white polycarbonate. The devices monitor temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The […]
READ MORE »
Context Plus Common Base, 45681-200 The Context Plus Common Base is designed to accept DIL switch addressed smoke Optical and Temperature detectors. Polarity must be observed as indicated. A self adhesive label is provided with each base to mark the detector address. If you require remote LED indication, an additional remote LED driver PCB assembly […]
READ MORE »
The Context Plus XP95 optical detector uses the same outer case as the ionisation smoke detector and is distinguished by the indicator LED which is clear in standby and red in alarm. Within the case is a printed circuit board which, on one side, has the light proof labyrinth chamber with integral gauze surrounding the […]
READ MORE »
The Context Plus XP95 optical detector uses the same outer case as the ionization smoke detector and is distinguished by the indicator LED which is clear in standby and red in alarm. Within the case is a printed circuit board which, on one side, has the light proof labyrinth chamber with integral gauze surrounding the […]
READ MORE »
Standard Temperature Detector, XPERT style, 55000-400IMCÂ High Temperature Detector, XPERT style, 55000-401IMC Context Plus XP95 temperature (heat) detectors have a common profile with ionisation and optical smoke detectors but have a low air flow resistance case made of self-extinguishing white polycarbonate. They monitor temperature by using a single thermistor network which provides a voltage output […]
READ MORE »
The Context Plus XP95 multisensor detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value.The multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor temperature sensor. The sectional view (below) shows […]
READ MORE »
Intelligent Mounting Base, XPERT style, 45681-210IMC Accepts all Context Plus Xpert card stlyle smoke and heat detectors. It is a zero insertion force base with dual finger receptacles of stainless steel into which the detector terminals slide. Cable connections of up to 2.5mm diameter are made via captive cable clamps. Includes four double terminals (L1 […]
READ MORE »