The CF300X control panel is designed in accordance with European standards EN54-2 and EN54-4 fire detection and fire alarm systems control and indicating.

Approved to EN12094-1 fixed fire fighting systems – components for gas extinguishing systems – Part 1.

The CF300X is compatible with all of the Cooper range of conventional detector, manual callpoint and sounders.

The control equipment is a combined fire alarm control panel and extinguishing system and has three detection zones, any or all of which are capable of contributing to the release decision

Features

• Test condition
• Delay of the actioning of fire alarm devices (sounders)
• Fire alarm devices to enable an audible warning to be sounded throughout premises upon the detection of a fire condition or the operation of a manual callpoint
• Voltage free relay contacts for fire
• Delay of extinguishing signal of up to 60 seconds
• Signal representing the flow of extinguishing agent to indicate
• the released condition
• Monitoring of the status of components by way of a low
• pressure switch input
• Emergency hold device to enable the extinguishing delay time to be extended
• Control of flooding time to deactivate the releasing output after a set period of time
• Manual only mode to disable the release of extinguishing via automatic detection devices
• Triggering of equipment outside the system by way of first and second stage contacts, extract fan output
• Activation of alarm devices with different signals to indicate pre-discharge and released warnings using different sounds